Juha Holopainen Posted July 25 Report Share Posted July 25 (edited) Changes from beta 2: FEEDERS and ACC views display aircraft on the calculated feeder crossing time. Sometimes the results may not be as expected, but the new FLOW view can be used as a backup, it's the same feeders view as in previous versions with the aircraft on the calculated landing time. Minor changes and bug fixes Edited August 23 by Juha Holopainen 2 Link to comment Share on other sites More sharing options...
Erik Wachters (815026) Posted July 26 Report Share Posted July 26 Hi Juha, First of all hanks again for the great work! I have one small issue when I use: Window_MAESTRO_Pos=40,500 The result is this: If I enter the airport: It looks like the Y coordinate of the lower part is not relative to the Y coordinate of the upper position. When I drag the upper right square down it becomes the lower right corner and everything look ok again. Kind regards, Erik Link to comment Share on other sites More sharing options...
Max Kuhla (1157125) Posted July 26 Report Share Posted July 26 (edited) First of all, thank you for the new update! I'm having some issues with it when quickly testing it on Sweatbox: Runway mode only showing an empty grey screen despite there being planes inbound, on the radar and in the suitable lists, the red line is shown as it should when scrolling down (and the usual "NO ACTIVE RWY" if none are selected) ACC and FLOW showing empty grey screen without text if no active RWY is selected, probably as intended? Any chance to get some kind of marking in the manual to see what's changed? It would make the detective work a bit easier EDIT: The aircraft popped up after removing this from the settings file: (On top as startup option) System_LoadType=1 System_SaveType=2 Edited July 26 by Max Kuhla (1157125) Link to comment Share on other sites More sharing options...
Juha Holopainen Posted July 26 Author Report Share Posted July 26 12 hours ago, Erik Wachters (815026) said: I have one small issue when I use: Window_MAESTRO_Pos=40,500 The code doesn't adjust the bottom right corner position accordingly (it remains at the default x,y=400,300). It'll be fixed. 3 hours ago, Max Kuhla (1157125) said: The aircraft popped up after removing this from the settings file: (On top as startup option) System_LoadType=1 System_SaveType=2 It's most likely the loadtype setting causing the plugin to get stuck in a loop trying to load a previous sequence to use as a starting point. 1 Link to comment Share on other sites More sharing options...
Recommended Posts