Bernardo Reis (1096507) Posted June 16, 2023 Report Share Posted June 16, 2023 1 hour ago, Nikita Zikeev (1475694) said: Tried AUP with .json file, but it doesn't work. How it can be fixed? Settings: System_UseAUP=1 HTTP_AUP_URL=.\TopSkyAreas.json .json: {"notice info":{"valid_wef":"2023-06-16T23:17:30"},"areas":[{"name":"UHR1318","minimum_fl":100,"maximum_fl":200,"start_datetime":"2023-06-16T06:00:00","end_datetime":"2023-06-17T11:00:00"}]} Do you have the area in the TopSkyAreas defined to activate by AUP? Link to comment Share on other sites More sharing options...
Nikita Zikeev (1475694) Posted June 17, 2023 Report Share Posted June 17, 2023 10 hours ago, Bernardo Reis (1096507) said: Do you have the area in the TopSkyAreas defined to activate by AUP? I have already defined it Link to comment Share on other sites More sharing options...
Nikita Zikeev (1475694) Posted June 17, 2023 Report Share Posted June 17, 2023 Tried to do AUP from txt, and it works, but im still looking forward for JSON format) Link to comment Share on other sites More sharing options...
Bernardo Reis (1096507) Posted June 17, 2023 Report Share Posted June 17, 2023 On 13/06/2023 at 14:08, Ahti Matilainen (1470273) said: Directs inserted via COPX->ROUTING don't go to the proxy instances. Not sure if they go to other controllers, haven't got to try that out yet... Tested it. They don't go, unless you use the probe menu Link to comment Share on other sites More sharing options...
Gursel Alp (1434943) Posted June 17, 2023 Report Share Posted June 17, 2023 Hello, I had this bug when tried to send manuel answer to traffic requesting direct to a waypoint. Link to comment Share on other sites More sharing options...
Jakob Arne Bronstad (1000634) Posted June 18, 2023 Report Share Posted June 18, 2023 DCL request but no way to reply to it. Normal clearance window when clicking on clearance flag. Jakob Brønstad Sectorfile Department Polaris FIR Link to comment Share on other sites More sharing options...
Juha Holopainen Posted June 18, 2023 Author Report Share Posted June 18, 2023 (edited) On 16/06/2023 at 19:56, Bernardo Reis (1096507) said: [_APP] Setup_LoadMap=ENVR\rivers Label_DIAS_Unsel_Default=1111 Seems like this setting is not turning on DIAS on unselected labels when connected with an APP callsign The settings affecting the track control window are a bit problematic as they are radarscreen-specific. At the moment they only affect any radarscreens created after the setting is changed (they only set the initial values a new radarscreen starts with). Currently the plugin does not keep track of created radarscreens so it hasn't got the ability to change those settings for already existing radarscreens. Ideally the setting would have the ability to define whether it would adjust only new screens, the current screen, all existing screens or a combination of those, but given the amount of additional code required, this will not be available in the near future. (Edit: any track control window settings in the settings files are now forced to all currently open and future radarscreens) On 16/06/2023 at 23:37, Nikita Zikeev (1475694) said: Tried AUP with .json file, but it doesn't work. How it can be fixed? Settings: System_UseAUP=1 HTTP_AUP_URL=.\TopSkyAreas.json .json: {"notice info":{"valid_wef":"2023-06-16T23:17:30"},"areas":[{"name":"UHR1318","minimum_fl":100,"maximum_fl":200,"start_datetime":"2023-06-16T06:00:00","end_datetime":"2023-06-17T11:00:00"}]} This is - at least - a typo in the documentation, "notice info" should be "notice_info" (underscore instead of whitespace). On 18/06/2023 at 00:17, Gursel Alp (1434943) said: Hello, I had this bug when tried to send manuel answer to traffic requesting direct to a waypoint. I'll fix the text positions. As a reminder to all, the manual reply option should only be used if the request message was not correctly recognized by the plugin and it is impossible to reply using the correct label menus. Edited July 2, 2023 by Juha Holopainen Link to comment Share on other sites More sharing options...
Juha Holopainen Posted June 18, 2023 Author Report Share Posted June 18, 2023 1 hour ago, Jakob Arne Bronstad (1000634) said: DCL request but no way to reply to it. Normal clearance window when clicking on clearance flag. DCL has its own window now and the departure list must be adjusted accordingly. Either use separate items and functions for the clearance flag and DCL, or the combined "List CLR/DCL/CMT" item with the "Open DCL Window/PDC Window" and "Open CMT Pop-up" functions which trigger different windows based on whether a DCL request has been received or not. 1 Link to comment Share on other sites More sharing options...
Recommended Posts